Contact Us

The selection of explosion-proof and non-explosion-proof air compressors must be strictly based on the safety risk assessment of the use scenarios. There are no general standards, and the following principles must be followed: 1. The applicable scenarios of explosion-proof air compressors where explosive substances are present are ambient gases/vapors: If chemical…

Guide for Capacity Selection of Laboratory Air Compressors As the core equipment for providing compressed air, laboratory air compressors are directly related to the stable operation of experimental equipment and energy efficiency. From a professional perspective, combined with the characteristics of laboratory scenarios,…

There are differences between fixed frequency and non-fixed frequency (converter). There are significant differences in the working principle, operation mode, energy consumption, stability, noise and vibration, cost, and applicable scenarios. 1. Working principle and operation mode Fixed frequency screw unit: Working principle: Gas compression is achieved through the rotational movement of a pair of spiral-shaped […]

In electronics plants, the moisture content of compressed air is a key indicator, which is directly related to the normal operation of production equipment and product quality. Generally speaking, electronics factories have strict requirements on compressed air, and their moisture content should be controlled at an extremely low level. Electronics factory compressed air moisture content […]

The noise of the air compressor may be caused by the following reasons: 1. Internal factors of the equipment Mechanical vibration noise: Component wear: For example, the components of the screw air compressor’s yin and yang rotor, bearing, connecting rod bearing, piston and cylinder are worn after long-term use, resulting in an increase in the […]