@air
2025-08-21

What does an air compressor mean by a few kilograms?

The “several kilograms” of an air compressor usually refers to the compressed air pressure parameter output by it, and the unit is “kilogram force per square centimeter”(kgf/cm²), which is often referred to as “kilogram pressure”. For example,”3 kg air compressor” means that its output pressure is about 3 kg force per square centimeter, which can meet the demand for compressed air pressure in different scenarios.

Granklin air compressor adopts water-lubricated single screw compression technology. Gas compression is achieved through the cooperation of a single screw and a star wheel plate, and water medium is used to replace traditional lubricating oil to complete lubrication and cooling functions. This design avoids the use of lubricating oil, eliminates the risk of oil pollution from the source, and ensures that the output compressed air is cleaner. At the same time, its pressure output can be flexibly adjusted according to the user’s actual working conditions to adapt to diverse gas demand.

Welcome!

Related Articles:
@air
2025-07-17

What is the standard air pressure in the workshop?

The supply pressure of the air compressor in the workshop is usually set according to equipment requirements, and the standard range is between 0.6 and 0.8 MPa (that is, 6 to 8 bar). This value can meet the normal operation requirements of most pneumatic tools, robotic arms and control systems, which is…

@air
2025-05-12

What is the pipeline pressure of 2.5mpa?

Explanation on the pipeline pressure of 2.5MPa The pipeline pressure of 2.5MPa (MPa) is an indicator to measure the fluid pressure in the pipeline and represents the intensity of the internal force exerted by the pipeline wall. For ease of understanding, the following analysis can be made: unit conversion 1…

@air
2025-03-05

Does the coating industry use a lot of gas?

The gas consumption in the coating industry is relatively large, which is mainly reflected in the following aspects: 1. Gas consumption demand in the coating production process In the coating production process, compressed air is needed to drive various pneumatic tools and equipment, such as pneumatic agitators, pneumatic sprayers, pneumatic conveyors, etc. These pneumatic tools […]

@air
2025-04-15

What is the compressed air pressure of CNC machine tools

A machining center equipped with an automatic tool changer can have a compressed air system set to 0.7MPa, and is equipped with a 3m³ air storage tank and a freeze dryer to ensure stable air pressure and meet air quality standards.

@air
2025-03-05

Will the screw air compressor automatically stop when it reaches the pressure?

Yes, when the pressure of the screw air compressor reaches the set upper limit, it will automatically shut down. The automatic start-stop function of screw air compressors is usually monitored and controlled through pressure sensors. When the pressure of the air compressor reaches the set upper limit value, the pressure sensor will send a signal […]