The supply pressure of the air compressor in the workshop is usually set according to equipment requirements, and the standard range is between 0.6 and 0.8 MPa (that is, 6 to 8 bar). This value can meet the normal operation requirements of most pneumatic tools, robotic arms and control systems, which is…

The main difference between micro-oil and oil-free types of air compressors lies in the lubrication method and the purity of compressed air. The specific differences can be understood from the following aspects: 1. Lubricating mechanism Micro oil compressor: A small amount of lubricating oil will be used during the compression process, and the oil mainly starts from…

The supply pressure of air compressors in factories is usually set according to the requirements of the equipment, and the standard range is between 0.6 and 1.0 MPa (i.e. 6 to 10 bar). This value can meet the normal operation requirements of most pneumatic tools, robots and control systems.

The pressure standard of the air compressor in the bottle blowing process needs to be comprehensively set according to the bottle type, material and process requirements. The specific specifications are as follows: 1. Core pressure range Conventional PET bottle standard range: The blowing pressure is usually between 2.5 and 4.0 MPa (2…

In the production process of oxytetracycline, air compressors are mainly used in fermentation and cultivation. The specific functions are as follows: Oxygen supply: During the microbial fermentation stage, the strain requires a large amount of oxygen for metabolic activities. The air compressor compresses ordinary air and passes through…

The continuous running time of an air compressor needs to be comprehensively judged based on the specific use scenarios and equipment status: equipment type affects small household models are usually recommended for intermittent use, while large industrial equipment can achieve continuous operation for 24 hours under standardized operation…

Application analysis of air compressors in the chemical fiber industry 1. Pressure grading requirements for the core demand of compressed air in the chemical fiber industry: Spinning process: 0.6-0.8MPa (6-8Bar) is needed to stabilize the air pressure to ensure uniform ejection of the melt. Drafting…

Analysis of oil content qualification standards for oilless air compressors 1. Core qualification standards According to the ISO 8573-1 compressed air quality standard formulated by the International Organization for Standardization (ISO), the oil content of oilless air compressors must meet the following requirements…

Analysis of the oil content standard at the outlet of air compressors 1. Overview of core standards The oil content in the compressed air discharged by air compressors must meet the following general standards. The specific requirements vary according to the application scenarios: Strict scenarios (such as chemical fiber, food, medical industries…

Analysis of industrial compressed air pressure range 1. Common pressure ranges for industrial compressed air In the industrial field, the pressure requirements for compressed air vary depending on the application scenarios and can usually be divided into the following three levels: low pressure range (0.2-1.0 MP…