@air
2025-12-23

Water content in outlet air of oil-free screw air compressor

The water content of the outlet air of oil-free screw air compressor usually does not exceed 80ppm (the water content per cubic meter of gas does not exceed 80 mg)If post-treatment equipment such as a dryer is installed, the water content can be further reduced to below 5ppm, and the pressure dew point can reach-40℃ to-70℃. The following is a detailed description of the water content of the outlet air of the oil-free screw air compressor:

When the oil-free screw air compressor itself is in normal operation, the water content of its outlet air will be affected by many factors, such as environmental humidity, the cooling effect of the air compressor, and the working status of the automatic drainer. However, if it meets national and industry standards, the water content of its outlet air generally does not exceed 80ppm.

In order to further reduce the water content of the outlet air of the oil-free screw air compressor and meet the production process with high quality requirements for compressed air, post-treatment equipment such as dryers is usually installed. These equipment can effectively remove moisture from compressed air, reducing the water content to below 5ppm, and at the same time, the pressure dew point can reach-40℃ to-70℃, thereby ensuring the dryness of compressed air.

Welcome!

Related Articles:
@air
2025-03-05

Does the coating industry use a lot of gas?

The gas consumption in the coating industry is relatively large, which is mainly reflected in the following aspects: 1. Gas consumption demand in the coating production process In the coating production process, compressed air is needed to drive various pneumatic tools and equipment, such as pneumatic agitators, pneumatic sprayers, pneumatic conveyors, etc. These pneumatic tools […]

@air
2025-03-31

What is the pressure of an air compressor in a general factory

The pressure range of an air compressor in a general factory is usually 0.6-1.0 megapascals (MPa), which is about 6-10 kilograms of force per square centimeter (bar), depending on the application scenario and equipment requirements. The following is a detailed analysis: 1. General…

@air
2025-07-16

What is the general air pressure in the factory?

The supply pressure of air compressors in factories is usually set according to the requirements of the equipment, and the standard range is between 0.6 and 1.0 MPa (i.e. 6 to 10 bar). This value can meet the normal operation requirements of most pneumatic tools, robots and control systems.

@air
2025-03-26

Difference between air compressor and cold drying machine

Air compressors and cold dryers are two common equipment in compressed air systems, but their functions and functions are completely different. The following are the core differences between the two: 1. The main function of different air compressors (air compressors) is to compress natural air into…

@air
2025-03-08

How often does the air compressor filtration system change?

The replacement cycle of the air compressor filtration system is not a fixed time, but depends on a variety of factors, including the use environment of the air compressor, air quality, filter quality, and manufacturer’s recommendations. The following is a detailed analysis of the replacement cycle of the air compressor filtration system: 1. Air filter […]