@air
2025-07-16

Which link is the air compressor used in the production of oxytetracycline

In the production process of oxytetracycline, air compressors are mainly used in fermentation and cultivation. The specific functions are as follows:

  1. oxygen supply: During the microbial fermentation stage, the strain requires a large amount of oxygen for metabolic activities. The air compressor compresses ordinary air, processes it into sterile clean air through a special filtration system, and continues to input it into the fermentation tank to provide necessary oxygen for microbial growth.

  2. environmental control: By adjusting the flow and pressure of compressed air, the temperature, humidity and dissolved oxygen in the fermentation tank can be controlled to maintain optimal microbial growth conditions and ensure stable fermentation process.

  3. material mixing: The air flow generated by compressed air can also help the fermentation liquor mix evenly, allowing the bacteria to fully contact with nutrients, and improving reaction efficiency.

In addition, in the subsequent extraction and purification process, air compressors may also be used to promote liquid material transportation or assist the drying process, but the core application still focuses on gas supply and process control during the fermentation and cultivation stage.

Welcome!

Related Articles:
@air
2025-03-07

How to solve the water in air compressor pipelines

Solve the problem of water accumulation in air compressor pipelines, you can start from the following aspects: 1. Analyze the causes of water accumulation First, it is necessary to clarify the causes of water production in the pipeline so that targeted measures can be taken. Common reasons include: Inadequate cooling of the air compressor: causing […]

@air
2025-06-24

What is the working principle of an adsorption dryer?

Analysis of the working principle of the adsorption dryer The adsorption dryer is an efficient equipment that removes moisture from compressed air through physical adsorption technology. Its core lies in using the selective adsorption ability of porous materials to achieve deep drying of the air. Work…

@air
2025-03-22

How often should the air compressor be maintained?

By scientifically formulating and strictly implementing maintenance plans, the entire life cycle cost of air compressors can be reduced by 40%, and the time between failures can be extended by more than three times. It is recommended to establish a digital maintenance record system based on the equipment manual to achieve predictive maintenance transformation.

@air
2025-03-31

How much MPa is compressed air generally?

The compressed air pressure is generally 0.6-1.0 MPa (6-10 bar), depending on process requirements, equipment power and industry standards. When selecting, you need to combine the equipment specifications and consult the engineer to ensure that the pressure is set reasonably and avoid efficiency or safety hazards caused by too high or too low.

@air
2025-07-10

How to express the oil content in compressed air?

The oil content in compressed air is usually expressed in the following two ways: the mass concentration expression method measures the mass of oil content per unit volume of air, and the common unit is milligrams per cubic meter (mg/m³). For example, when the test results show…