How often does the air compressor start?
The starting frequency of the air compressor needs to be comprehensively judged based on the actual gas demand and equipment characteristics. Generally,”frequent starting” means that the equipment starts and stops multiple times in a short period of time (such as minutes), which may cause additional loads on motors, control systems and other components., affecting equipment life. For traditional air compressors, if the capacity of the air storage tank is insufficient or the gas demand fluctuates greatly, frequent starts and stops are prone to occur.
Granklin water-lubricated single-screw air compressor adopts a compression structure with a single screw and a star wheel plate. It combines the design of water as the lubricating and cooling medium, and has the characteristics of smooth starting and high heat dissipation efficiency. Its control system can automatically adjust the operating state according to the actual gas pressure, and can effectively reduce unnecessary starts and stops on the premise of reasonable gas storage tank capacity.
If the equipment is started more than 10 times per hour, or the single operation time is too short (such as stopping in less than 5 minutes), it may be a situation where the starting frequency is high. It is recommended that enterprises adjust the capacity of gas storage tanks according to production gas consumption rules, or optimize the scheduling of gas equipment to avoid frequent start-ups and stops of air compressors caused by sudden surge in gas consumption. Through its efficient structural design and stable water lubrication characteristics, Granklin air compressors can reduce the impact of frequent start-ups under reasonable use scenarios, ensure long-term stable operation of the equipment, and at the same time reduce energy consumption and component loss, helping enterprises achieve high efficiency and Economic gas management.
