@air
2025-03-20

Can the micro-oil screw air compressor filter out oil-free gas?

Micro-oil screw air compressors usually cannot filter out completely oil-free gas. The following is a detailed explanation of the problem:

Micro oil screw air compressor working principle

the working principle of the micro-oil screw air compressor is that two parallel yin and yang rotors mesh with each other in the cylinder to form a working volume. With the rotation of the rotor, the size of the working volume changes periodically, so as to realize the suction, compression and discharge of gas. In this process, in order to reduce friction and wear and improve the service life of the equipment, the micro-oil screw air compressor usually uses a small amount of lubricating oil.

Lubricant Involvement

during the compression process of the micro-oil screw air compressor, the lubricating oil will participate to form a lubricating oil film and cover the surface of the screw. This not only reduces friction and wear, but also helps with cooling and sealing. However, this also means that the compressed gas will contain a certain amount of oil.

Gas Treatment and Filtration

although micro-oil screw air compressors produce oil-bearing gas during compression, modern equipment is usually equipped with an oil-gas separator. The main function of the oil-gas separator is to separate the oil in the compressed gas to reduce the oil content of the gas. However, the separation efficiency of the oil-gas separator is not 100%, so the separated gas still contains a small amount of oil.

Oil-free air demand

in some occasions with high air quality requirements, such as food, medical, electronics and other industries, it is necessary to use completely oil-free compressed air. For these applications, oil-free screw air compressors are the better choice. The oil-free screw air compressor is designed to avoid the participation of lubricating oil, so as to provide pure oil-free compressed air.

Conclusion

in summary, the micro-oil screw air compressor usually cannot filter out completely oil-free gas due to the participation of lubricating oil. Although equipped with a gas separator, but the separated gas will still contain a small amount of oil. Therefore, in the case of completely oil-free air, oil-free screw air compressor should be selected.

Welcome!

Related Articles:
@air
2025-08-15

What is the general air pressure in a factory?

Factory compressed air pressure range indicates that in industrial production, the pressure demand for compressed air is usually set based on equipment type and process requirements. Granklin air compressors use precision water-lubricated single screw compression technology to achieve stable output that meets the requirements of most factories…

@air
2025-08-05

What factors need to be considered when selecting the capacity of an air compressor?

When selecting the capacity of the air compressor, it is necessary to comprehensively consider the actual gas demand and equipment operating efficiency to ensure that production requirements are met while avoiding waste of resources. Specific attention should be paid to the following factors: 1. The total demand for gas equipment needs to be counted on all gas equipment (such as gas…

@air
2025-02-28

How to Handle Oil-Water Mixture in Compressed Air?

Compressed air systems often produce oil-water mixtures as a byproduct, which can cause equipment damage, reduce efficiency, and lead to environmental issues. Proper treatment is essential to maintain clean and dry air.

@air
2025-06-25

Air compressors are generally explosion-proof or non-explosion-proof

The selection of explosion-proof and non-explosion-proof air compressors must be strictly based on the safety risk assessment of the use scenarios. There are no general standards, and the following principles must be followed: 1. The applicable scenarios of explosion-proof air compressors where explosive substances are present are ambient gases/vapors: If chemical…

@air
2025-03-07

Why do you need to refuel the air compressor?

The main reason for refueling the air compressor is to ensure the normal operation of the machine and extend the service life. Specifically, the importance of refueling of air compressors is reflected in the following aspects: 1. Lubrication effect Reduce wear: There are many high-speed running components inside the air compressor, such as crankshaft, connecting […]