How to set the minimum exhaust pressure of the air compressor

Setting the minimum exhaust pressure of an air compressor usually requires operation according to the type of the air compressor, the type of control panel, and the specific application requirements. The following are the general settings steps and precautions: 1. Control panel type and setting steps

1. Key controller

   • Enter the menu: Press the Move key first to enter the menu option and find the user parameters.
   • Enter user parameters: Enter user parameter settings by moving the right key.
   • Find the loading pressure: Flip down to find the loading force and unloading pressure. The loading pressure is when the compressed air pressure is below this value, the space compressor will load gas.
   • Enter password: Find the pressure option that needs to be adjusted, press the right button to enter, and the system will prompt to enter the user password. At this time, press the Move Up or Down key to enter the correct user password.
   • Adjust pressure: After the input is completed, press the S key to enter the adjustment interface and adjust the loading pressure (i.e., the minimum exhaust pressure) according to your own pressure needs.
   • Save settings: Press S key to save the settings after the adjustment is completed.

2. Touch screen control panel

   • Enter menu: Click the menu button to enter the user parameter adjustment interface.
   • Input Password: You also need to enter the correct user parameter password to enter the parameter adjustment interface.
   • Adjust pressure: Adjust the loading pressure and unloading pressure according to your actual needs. The loading pressure is the minimum exhaust pressure.
   • Save settings: Save settings after adjustment is completed.

2. Precautions

1. Pressure range

   • When setting the minimum exhaust pressure, it is necessary to ensure that the pressure value is within the rated pressure range of the air compressor. If the set pressure is too low, it may affect the normal operation and gas production efficiency of the air compressor; if the set pressure is too high, it may exceed the air compressor’s bearing capacity and cause equipment damage.

2. Application Requirements

   • When setting the minimum exhaust pressure, you also need to consider specificApplication requirements. For example, some pneumatic tools or equipment may have specific requirements for air pressure, which requires ensuring that the air compressor can provide sufficient air pressure support.

3. Safe Operation

   • When performing pressure setting operations, it is necessary to ensure that the air compressor has stopped operating to avoid equipment damage or casualties caused by misoperation. At the same time, operators should have corresponding professional knowledge and skills, and be familiar with the operating procedures and safety precautions of air compressors.

4. Maintenance

   • Regularly check the operating status and performance parameters of the air compressor to ensure that the equipment is in a good working condition. If the pressure setting is found to be improperly set or the equipment is faulty, adjustment and repair should be carried out in time.

3. Special circumstances

For some special types of air compressors, such as screw air compressors, the pressure setting method may be different. For specific settings steps and precautions, please refer to the air compressor’s manual or consult the manufacturer’s technical support staff.

In general, setting the minimum exhaust pressure of an air compressor requires certain steps and precautions to ensure the normal operation of the equipment and meet application needs.