To obtain oil-free compressed air, the following methods and techniques can be used: 1. Use an oil-free air compressor Definition and principle: The oil-free air compressor does not use lubricant during the compression process, thereby preventing the lubricant from entering the compressed air and directly outputting low-oil or close to oil-free compressed air. Advantages: The […]

Cold dryers (refrigerated dryers) are indeed general equipment, especially in the industrial field. The following is a detailed explanation of the cold dryer as a general equipment: Definition and Principles The cold dryer is an important industrial equipment. It uses the cooling and drying process to condense the water vapor in the compressed air into […]

Inverter compressors are generally not recommended to run without load. The working principle of a variable frequency compressor is to adjust the gas production by changing the working frequency of the compressor. If it is in no-load state, the variable frequency compressor will be started and stopped continuously, which will lead to a significant increase […]

The gas consumption of a machine in a factory varies depending on the type of equipment, scale, production process and operating time, so it is difficult to give an exact value. However, I can provide some general information and estimation methods. Overview of general gas volume Small equipment: Some small processing equipment, such as precision […]

The pressure range of screw low-pressure air compressors is usually between 0.2~1.0MPa. However, it should be noted that the pressure range of screw low-pressure air compressors of different models and brands may vary. In practical applications, the pressure setting of the screw low-pressure air compressor should be determined according to the specific usage requirements. For […]

Whether the air compressor needs to be shut down when there is no one in the factory, it mainly depends on the specific situation of the factory and the operating mode of the air compressor. The following is a detailed analysis of this problem: 1. Considerations Production Requirements: If the air compressor is a key […]

The main differences between air compressors used in laboratories and clinics are reflected in the following aspects: 1. Usage environment and requirements Laboratory air compressors Environmental requirements: Laboratory environment usually requires high noise control to provide a good working environment. Air Quality: Most laboratory equipment is high-precision instruments, which have high requirements for compressed air […]

Shanghai water lubricating oil-free screw air compressor is an advanced air compressor equipment with advantages such as environmental protection, energy saving, high efficiency and stability. It is widely used in many industries such as medicine, food, chemical, electronics, and textiles. The following is a detailed introduction to Shanghai water lubricating oil-free screw air compressor: 1. […]

When the air compressor is operating normally but the air supply is insufficient, it can be checked and dealt with in the following aspects: 1. Check for air leakage Air leakage is a common cause of insufficient air supply for air compressors. Air leakage may occur at all links of the air compressor, such as […]

The oil in an oiled air compressor does not specifically refer to bearing lubricating oil, but refers to lubricating oil used to lubricate and cool various components of the air compressor, which is usually called air compressor oil or special oil for air compressors. The main functions of oil in oil-containing air compressors include: Luction: […]