Air compressors are indispensable key equipment in machining centers. Their stability, cleanliness and economy make them irreplaceable in the field of metal processing.

The management of air compressors needs to be combined with daily maintenance, troubleshooting, energy efficiency optimization and safety specifications. The following are carried out from 12 core dimensions: 1. Daily maintenance and clean environment management keep the machine room dry and ventilated, and the temperature is controlled at 0 – 40℃,…

The replacement cycle of the screw air compressor oil separator (oil content) needs to be comprehensively judged based on factors such as equipment model, operating environment, operating load, etc. The specific suggestions are as follows: 1. Normal replacement cycle Under standard working conditions: replace every 3,000 to 3,500 hours…

Automatic shutdown of air compressors may be caused by a variety of factors. The following are divided into 5 core categories and 18 specific reasons, and targeted solutions are provided: 1. Overheat protection shutdown (accounting for 45%) Poor environmental ventilation: Air compressor Distance from the wall…

There are the following eight core differences between oil-containing air compressors and oil-free air compressors in the air compressor room. I will conduct a comprehensive analysis from the technical principles, cost of use and industry applications: 1. Lubrication methods revolutionize oil-containing oil machines: Relying on lubricating oil lubrication, through the oil pump, you can…

The rated exhaust pressure is the “design ID” of the air compressor, and the gas production pressure is the “real-time working state”. Reasonable matching of the two can ensure efficient and safe operation of the equipment and avoid production accidents caused by insufficient pressure or overload.

Drain water from an air compressor is a key step in daily maintenance. Correct operation can prevent condensate from corroding equipment. The following is a detailed operation guide: 1. Bottom of the air tank at the water discharge position: It is usually equipped with a ball valve/plug valve, and some models have automatic drainers…

Coking in air compressors is a complex problem caused by lubricating oil under the effects of high temperature, oxidation, metal catalysis, etc., and it needs to be dealt with in stages based on the causes. The following are specific treatment plans and prevention strategies: 1. In-depth analysis of the causes of coking, lubricating oil deteriorates and is abnormal…

When selecting an air compressor, you need to weigh it according to actual needs: if you pursue low cost, high lubrication performance, and are not sensitive to the oil content of the gas, you can choose an oil-lubricated air compressor. If you need absolute oil-free, highly clean gas, or have requirements for environmental protection and long-term maintenance costs, an oil-water-free lubricated air compressor is more suitable.

Air compressors need regular drainage. The main reasons and impacts are as follows: 1. Why does air compressors need drainage? The moisture in the air is compressed by the air itself. When the air compressor compresses the air, the moisture will be compressed into a supersaturated state, forming…