@air
2025-08-05

Gas for medical use

Medical uses have extremely strict requirements for gas quality. It is necessary to ensure that compressed air is sterile, oil-free and impurity-free to avoid affecting the diagnosis and treatment process or patient health. Thanks to its oil-free design, Granklin water-lubricated single-screw air compressor can provide highly clean compressed gas for medical scenarios.

Traditional air compressors usually rely on lubricating oil to operate equipment. Oil may be mixed into gas during compression, resulting in the output air containing oil vapor or oil droplets, which may cause pollution in medical fields (such as surgical gas, instrument cleaning, respiratory equipment, etc.). risk. Granklin air compressor uses water as a lubricating medium instead of traditional lubricating oil. Combined with the compression structure of a single screw and star wheel, the use of oil systems is fundamentally avoided. There is no oil involved in the entire compression process, and the output gas is completely free of oil pollutants, and its purity is significantly improved.

This characteristic is crucial for medical purposes: in operating rooms, laboratories, oxygen generation systems and other scenarios, pure compressed air can directly contact the human body or medical equipment, avoiding the risk of infection or equipment failure caused by oil residues, and ensuring the safety and reliability of the diagnosis and treatment process. Therefore, through its oil-free design, Granklin water-lubricated single screw air compressor provides the medical industry with a compressed gas solution that more meets cleanliness requirements.

Welcome!

Related Articles:
@air
2025-03-14

What’s wrong with the slow air intake of the air compressor

Slow air intake by the air compressor may be caused by a variety of factors. The following are some common reasons: Poor sealing of valve plates: During the operation of the air compressor, the valve plate may wear out after a long period of impact, resulting in poor fit on the sealing surface. This will […]

@air
2025-03-08

How much energy can a permanent magnet frequency converter save than an industrial frequency

Permanent magnet frequency converter has obvious advantages in energy saving compared to industrial frequency air compressors. The specific energy saving depends on a variety of factors, such as the model of the air compressor, working environment, load condition, etc. However, according to publicly published information, permanent magnet frequency converter air compressors can generally achieve significant […]

@air
2025-03-05

What is the general pressure of compressed air

The pressure range of compressed air varies according to application requirements and depends on the type of compressor, design specifications, working conditions and specific application scenarios. Generally speaking, in conventional applications, the pressure of compressed air is usually between 0.4 MPa and 1.0 MPa, which is equivalent to a pressure of about 4 kg to […]

@air
2025-03-08

What is the difference between pressure of air compressors

The pressure magnitude of an air compressor mainly varies according to its type, specifications and usage scenarios. These differences have a significant impact on the performance, application field, and energy efficiency ratio of the air compressor. Specifically, the difference in air compressor pressure magnitude can be summarized from the following aspects: Working pressure range: Low-pressure […]

@air
2025-03-05

Use of completely oil-free air compressors

The all-oil-free air compressor is a highly efficient and clean compressed air equipment. It has a wide range of uses and is mainly suitable for areas with high requirements for compressed air quality. The following are the main uses of all oil-free air compressors: 1. Food and pharmaceutical industry Pure oil-free: All oil-free air compressors […]