@air
2025-05-06

Which is good for oil-free air compressor

Granklin water-lubricated air compressors perform well in the field of oil-free air compressors. The following is a detailed introduction of their advantages:

technological innovation

  • High-quality material selection: The main machine uses stainless steel rotor and hydrophilic star wheel, which is perfectly matched to ensure the stability and reliability of the air compressor during long-term operation.
  • Granklin’s patented mechanical sealing technology: It can ensure that compressed air is 100% oil-free. After long-term testing, this mechanical sealing technology has a life of more than 20000 hours, effectively solving the sealing problem of oil-free air compressors and ensuring the purity of compressed air.

performance advantages

  • Efficient and energy-saving: Through advanced technology and optimized design, Granklin water-lubricated air compressor saves more than 15% energy than second-stage dry twin screws and more than 36% energy than first-stage dry twin screws, which can save users a lot of energy. cost.
  • Pure compressed air: Water is used as the compression sealing and cooling medium. Through advanced sealing and isolation technology, the possibility of oil pollution is eliminated. Pure oil-free compressed air can be provided to meet the requirements of medicine, food, electronics, etc. Industry demand.
  • Stable and reliable operation: the single screw is balanced in both axial and radial directions, the star wheel rotates freely with the screw under water film lubrication, and the main engine components operate smoothly under low load, reducing vibration and wear of the equipment, reducing failure incidence rate, ensuring long-term stable operation of the equipment.
  • Low noise: Due to the smooth operation of the main machine components, the noise generated during operation of the Granklin water-lubricated air compressor is low, which can create a relatively quiet atmosphere for the working environment and is conducive to the physical and mental health and work efficiency of the staff.

functional characteristics

  • Intelligent control system: Equipped with an intelligent control system, it can monitor the operating status of the equipment in real time, such as pressure, temperature, flow and other parameters, and automatically adjust it according to actual needs to ensure that the equipment always runs in the best state and is also convenient. User operation and management.
  • Various protection functions: The whole machine is equipped with multiple protection functions such as pressure, temperature, and overload. When abnormal conditions occur to the equipment, it can automatically shut down in time or take corresponding protective measures to avoid equipment damage and safety accidents, and ensure the safety of equipment and personnel.
  • Frequency conversion function: Some models of Granklin water-lubricated air compressors have frequency conversion function, which can automatically adjust the flow and pressure of compressed air according to production needs, avoiding energy waste and achieving efficient energy utilization. It is especially suitable for gas consumption. Working conditions with large fluctuations.

service guarantee

  • All-round technical support: Granklin Group has a professional technical team that can provide customers with all-round technical support, including product consultation, selection suggestions, installation and debugging guidance, etc., to help customers choose the most suitable air compressor products and ensure the correct installation and debugging of equipment.
  • Complete after-sales service: Provide a complete after-sales service system, including regular maintenance, fault repair, spare parts supply, etc., to ensure that problems encountered by customers during use can be solved in a timely and effective manner, reduce equipment downtime, and ensure normal production. proceed.
Welcome!

Related Articles:
@air
2025-04-11

How often should permanent magnet screw air compressors be maintained?

The maintenance cycle of permanent magnet screw air compressors needs to be comprehensively determined based on factors such as frequency of use, environment, and equipment model. The following are specific suggestions: 1. Refer to daily/weekly inspections for regular maintenance cycles to check oil levels, condensate emissions, and clean heat sinks…

@air
2025-07-02

Should the air compressor room be anti-static?

Anti-static measures need to be taken in the air compressor room. The air compressor room is a place for storing and operating air compression equipment. Its environmental characteristics and equipment operation requirements determine the necessity of anti-static measures. The following are electrostatic hazards, environmental risks and protection requirements…

@air
2025-03-28

What is the gas pressure of the air compressor

The air compressor gas pressure needs to be comprehensively set according to the equipment type, purpose and environment. Low-voltage equipment is suitable for small tools, while medium and high-voltage equipment needs to match industrial needs and follow the manufacturer’s rated parameters. Regular maintenance and adaptation to the environment are the key to ensuring pressure stability.

@air
2025-12-22

Influence of oil injection on performance of screw compressor

The impact of oil injection on the performance of screw compressors is mainly reflected in the following aspects: the cooling effect is significantly improved. The micro-droplet oil mist formed by oil injection mixes with the compressed gas, quickly absorbs the heat of compression through the huge heat exchange area, effectively reducing exhaust gas temperature. Example…

@air
2025-08-19

Role of hospital air compressors

Hospital air compressors are indispensable power support equipment in the medical system. Their core role is to provide stable and clean compressed air for various medical equipment and treatment scenarios to ensure the safety and effectiveness of the diagnosis and treatment process. Specific application scenarios and functions…